Product List

DESCRIPTION
The MG200 Series Gear Pumps are compact precision performance products for high technology applications. The magnet drive principle provides a totally sealed pump chamber that is capable of handling a wide range of corrosive liquids with a high degree of safety. The housing of the pump and the internal metal parts are AISI 316 stainless steel. The MG Gear Pump gears are in PEEK.

In operation, the MG 200 Series gear pumps are noiseless, pulsation-free and capable of handling relatively hot liquids, i.e., 120°C at a low coefficient of expansion. The principle of the magnet drive comprises an inner PEEK encapsulated magnet embodied in the pump, connected to the driving gear, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the magnets provides the driving motion to the pump. Decoupling occurs when the pump load exceeds the coupling torque between the magnets.
In/Out ports have 1/8” NPT female threads. A built-in relief valve is available upon request.

Typical Applications:

• Medical  equipment

• Hemodialysis apparatus

• Lab instrumentation

• Cooling systems

• Ink-jet printing systems

• Water purification

• Exhaust fumes treatment

• Seal flush

• Laser apparatus

FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE

     Model                    Gear width

Housing

Connections

                        04=4MM

     MG2                         09=9MM

Stainless Steel(316)

1/8" NPT

                                     13=13MM

Parameter

Temperature ranges:

PEEK: -45°C / +120°C

Voltage

220VAC

380VAC

Frequency

50HZ

60HZ

Poles

2

2

Rated Pressure

5bar

5bar

Flow rate

50-2400ml/min

50-2400ml/min

Output power

120W

180W

Weight

3.3kgs

3.3kgs

Performance Curve

Dimensions(mm)